This machine is mainly suitable for testing the rebound height of rubber materials. Adjust the level first, then raise the hammer to a certain height and test it in a vertical free fall manner. When placing the test piece, attention should be paid to ensuring that the landing point is 14mm away from the edge of the test piece. The first three tests are not used, and the rebound heights of the fourth, fifth, and sixth tests are recorded and averaged.
      
      Features of this machine:
      1.7-inch touch screen control
      2. Equipped with customized microsecond level sensors
      3. Touch screen control for the rise and fall of the test stand, with the ability to switch between jog and regular modes
      4. Automatic sensing of sample height, automatic stop of the test stand upon contact with the sample, avoiding manual intervention
      5. Automatic calculation of height difference to accurately calculate rebound height
      6. Automatic calculation of rebound value and average value
      7. Calculation of results as soon as the hammer falls and bounces once, promptly and quickly
      8. CNC machining, hardened surface treatment