This machine is used for dry and wet abrasion test of textile materials. Principle: Under constant pressure, the sample is clamped on the grinding head and rubs against the selected abrasive. The relative motion between the abrasive and the sample forms a complex cycle diagram (Lissajous diagram) with friction in all directions. After a certain number of times, the damage phenomenon of the material is evaluated

The test equipment meets the requirements of horizontal combustion standard, and is used for horizontal combustion test of automotive interior parts. The box body of the product is powder baking paint, and is equipped with transparent observation window, digital timer to record the time of applying flame and remaining flame. The device has beautiful appearance, convenient use and reliable performance.

This machine is developed by the color fastness Committee (FEK) of the Swiss Leather Association (veslic). It is mainly used for testing leather properties such as dyeing fastness and abrasion resistance under wet and dry friction tests. It can put several pieces of samples at the same time and achieve the purpose of multi sample testing by moving the position of the friction head. The standard specification of this machine is also approved by iulc.

This machine is suitable for wear resistance test of various textiles, leather, carpet, rubber, plastic sheet coating, paper, floor tile, plywood, glass, plastic sheet, natural rubber, etc. Design principle: The test method is to cut the test piece with the specified standard cutter, use the specified type of grinding wheel, and load a certain weight to wear. When the test material rotates, drive the wear wheel to wear the test material. Take out the test piece after the specified number of revolutions, observe the condition of the test piece or compare the weight difference before and after the test. The use of this machine can refer to the test methods: DIN53863.2/53754/53799/53109、ASTM-D3884、ISO5470-1;TAPPI-T476﹑ASTM-D4157、SAE J365、Citroen standards。 This machine is widely used in Adidas GE-28 Taber friction standard.

This machine is suitable for all finished shoes and leather that require no trace test. Non marking test is to evaluate the performance of rubber soles and leather without marks. Test and identification: If there are marks on the board, the test result is marking If there is no trace on the board, the test result is non marking Application Industry: It is suitable for scientific research laboratory, commodity inspection and arbitration, technical supervision department of shoe industry, leather industry, automobile interior decoration industry, clothing industry, luggage and handbag industry, etc. The use of this machine can refer to the test method: ADIDAS FGT-68 and other relevant standards.

SATRA TM31 MARTINDALE Abrasion test standard：The purpose of this test standard is to determine the dry and wet abrasion resistance of a material. This method is mainly used for weaving, coated weaving and leather, but it can also be used for any soft sheet material

The purpose of this test method is to test the strength of a package of accessories at the end of a shoelace. This method is applicable to all types of shoelaces and shoelace end packages, and can also be used for accessories with similar models

The text of ISO 17235:2002 has been approved by CEN as EN ISO 17235:2002 w ithout any modifications. NOTE: Nor mative references to International Standards are listed in Annex ZA (normative). 1.0 Scope This International Standard specifies a non-destructive method for determining the softness of a leather. It is applicable to all non-rigid leathers e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather. 2.0 Normative References

Testing items of leather products

Take out the felt from the water before use and squeeze out the water to make the weight of the felt about 1g. This standard is revised as: remove the felt from water before use. Place it in the middle of four absorbent filter papers (two at the top and two at the bottom, and the test surface is in horizontal contact with the pool paper), and then place a weight of (9001 + - 10) g on the filter paper for 1 min to squeeze out the water, so that the weight of the felt reaches about Ig. It is verified by experiment. The added content can meet the requirements of iso11640, at the same time, the tester can adopt a unified test method and operate more accurately. Reduce the error of the test and ensure the consistency of the test results.

Phenol yellow test technology training，EN ISO 105-X18:2007,M&S C20B

Training on testing technology of color fastness to perspiration，ISO 105 E04:1994,AATCC 15、107,DIN 54020,M&S C7

Technical training of penetration color fastness (color shift) test，DIN 53343,ADIDAS FT-02