TABER S-34
Taber S-34 Zinc Plate
According to standard: NEMA
S-34 zinc plate shall not be grinded more than ten times on each side S-34 Zinc Standardization Plates are used to evaluate the abrasion characteristics of S-42 and S-33 sandpaper strips. Each plate is 4” square, . 032” zinc with ¼” center hole. (5 pcs.)
| size: | 100mm × 100mm |
| thickness: | 0.8mm |
| opening: | diameter 6.35mm |
| packaging: | 5 pieces / box |
GCI Testing Instrument Co., Ltd
ATTN：Mr.chen Email：Janray@163.com
Address：No. 41, East Zone 2, Xinxing Street, Datangtou, Dongcheng District, Dongguan City
Copyright © GCI Testing Instrument Co., Ltd All Rights Reserved.